Point drainage with
Floor-level shower systems
The thinnest complete system for floor-level showers available on the market. Thanks to the pre-fabricated drain, the entire system is a mere 65mm. This innovative system is absolutely unbeatable in renovation work, such as old building renovations, where every millimetre counts. Of course it goes without saying that the product offers all the advantages of the wedi products with a proven reliability of more than 27 years – from the guaranteed 100% waterproofness through to the versatile and simple application. Perfection in renovation.
Mark out the necessary channel for the pipe.
Apply a contact layer of tile adhesive to the rear of the element and fill the drain pot with mortar.
Then, spread the rear with tile adhesive (10 teeth).
Glue the element into the recess...
... and connect the pipe. Then, close the opening with a mortar mixture.
You can start to seal the join areas after 24 hours.
Cut the supplied sealing corner to size according to the recessed corner, incl. an overlap of approx. 5 cm.
Glue the sealing corner with tile adhesive.
Seal the remaining joins and screed transitions with the wedi Fundo sealing set.
Use the pre-installed frame for foundation heights up to 8 mm.
Use the supplied support frame for a foundation height from 13 to 30 mm.