Erfahren Sie mehr
wedi I-Board Top

wedi I-Board Top

new

"The ready-to-use surface for the wedi I-Board"

Product information

There is seamless cladding for the wedi I-Board dry wall cladding too: the wedi I-Board Top. Particularly in hygienically demanding areas, it is better to do away with high numbers of joints which cannot be kept perfectly clean. “Easy to clean” has a completely different significance in this area of the bathroom.

wedi I-Board Top is the perfect surface for wedi I-Board and wedi I-Board Plus WC dry wall installations and a high-quality alternative to conventional tiling. The one-piece, seamless element is made from a 6 mm thick, high-quality, coloured material with a very elegant look and a pleasant feel. The material always feels just the right temperature and, at the same time, is very durable.

The design surfaces create a seamless, and thus attractive and low-maintenance surface. The five different shades and textures provide space for individual character and a wide range of variations.

As a 100% waterproof system component, the ready-to-use I-Board Top can be applied to the matching I-Board/I-Board Plus particularly easily and securely.

Adhesion of the Top to the I-Board/I-Board Plus is done using wedi 610 adhesive sealant.

  • Seamless design surfaces
  • Modern colours in a natural stone look
  • Easy to clean
  • Ready-to-use and exact

I-Board Top technical properties


Material colour pure white
Material colour stone grey, sahara beige, concrete grey, carbon black
Acrylic resin bonded mineral material
Mineral and vinyl composite material
Material thickness 6 mm
Weight colour pure white
Weight colour stone grey, sahara beige, concrete grey, carbon black
9,6 kg/m²
9,0 kg/m²

Coefficient of thermal expansion colour pure white
Coefficient of thermal expansion colour stone grey, sahara beige, concrete grey, carbon black
5.6 · 10-6 · K¯¹ (in accordance with DIN 53752)

7.07 x 10-5 K¯¹ (DIN 53752)

Bending strength colour pure white
Bending strength colour stone grey, sahara beige, concrete grey, carbon black
65 N/mm² (in accordance with DIN EN 310)
80 MPa (DIN 53452)
Ball indentation hardness 260 N/mm² (in accordance with DIN ISO 2039-1)
Tensile strength colour pure white
Tensile strength colour stone grey, sahara beige, concrete grey, carbon black
37 MPa (in accordance with DIN EN ISO 527)
45 MPa (DIN 53455)
Continuous temperature resistance up to 70°C (in accordance with DIN EN ISO 13894-1)
Water resistance present
Suitable for underfloor / wall heating yes
Ability to resist temperature changes passed (-50°C/+70°C)
Fire behaviour E (in accordance with EN 13501-1)
Bacterial resistance

resistant to mould and bacterial contamination (in accordance with DIN EN ISO 846 A/C), demonstrable reduction of bacteria on the surface (up to 99.9% within 24 hours in accordance with JIT Z 2801)
Chemical resistance resistant to normal household chemicals
Scratch resistance present (see care instructions)
Impact resistance present
Floor impact resistance performance class Performance class 33 for areas with heavy use such as: shop fitting / hotels (in conformity with DIN EN 13329)
Cuttability
Can be worked with all common tools, such as a hand-held circular saw. A jigsaw can be used for recesses in the wedi Top Wall for fittings.

Slip resistance colour pure white
Slip resistance colour stone grey, sahara beige, concrete grey, carbon black
A (in accordance with DIN 51097)
B (in accordance with DIN 51097)
Wheel-chair navigability present
Cleanability easy to clean (see care instructions)
Ease of disposal Waste code 170203 construction and demolition waste

Surface quality colour pure white
Surface quality colour stone grey, sahara beige, concrete grey, carbon black
homogeneous surface
textured natural stone look
Feel heat-retaining

Product sizes

Order no. Designation Length x width x thickness
073964250 wedi I-Board Top ready-to-use surface for wedi I-Board, homogeneous, mineral material, pure white 1.200 × 1.245 × 6 mm
073964251 wedi I-Board Top ready-to-use surface for wedi I-Board, natural stone look, mineral and vinyl composite material, stone grey 1.200 × 1.245 × 6 mm
073964253 wedi I-Board Top ready-to-use surface for wedi I-Board, natural stone look, mineral and vinyl composite material, Sahara beige 1.200 × 1.245 × 6 mm
073964254 wedi I-Board Top ready-to-use surface for wedi I-Board, natural stone look, mineral and vinyl composite material, concrete grey 1.200 × 1.245 × 6 mm
073964252 wedi I-Board Top ready-to-use surface for wedi I-Board, natural stone look, mineral and vinyl composite material, carbon black 1.200 × 1.245 × 6 mm

Installation:
As a 100 % wedi system component, I-Board Top is glued onto the wedi I-Board using wedi 610 after installation of the element. Please find a detailed description of the installation steps in the separate installation instructions.  The I-Board Top element is individually customisable and can be cut to the desired dimensions as required.

Transport and storage:
Each wedi Top Line element should be transported with great care and stored horizontally. The element should only be stored in the packaging intended for this purpose.

Other:
Information concerning care, cleaning and repair can be found in the separate care instructions. These are enclosed with the product and are available in the download area.

Mandatory articles

Optional articles

Privacy Policy