wedi Primo Easy Set Individual substructure as a complete set
Technical properties Fundo Primo Easy Setwedi Fundo floor elements can be cut to size on site, the geometry of the elements should be maintained however. wedi fundo elements can only be combined with the wedi Fundo drains.
|Extruded polystyrene rigid foam core||XPS|
|Long-term compressive strength (50 years) ≤ 2% compression EN 1606||0,08 N/mm2|
|Compressive resistance at 10% compression EN 826||0,25 N/mm2|
|Thermal conductivity EN 13164||0,036 W/mK|
|Bulk density EN 1602||32 kg/m3|
|Temperature limits||-50°C / +75°C|
|Fire behaviour EN 13501||E|
|Waterproof tested to||1,5 bar|
The wedi Fundo system can be installed on almost any surface as an individual tileable floor-level shower system. The system includes a sealed foam core with special coating, a specified surface slope as well as a perfectly-fitting system floor drain.
Areas of use Fundo Primo Easy Set
- In domestic residential construction
- In publicly accessible buildings and workplaces complying with DIN 18040 part 1
- In accessible dwellings complying with DIN 18040 part 2;(note specifications for minimum tile size if wheelchair access is planned, see technical properties)