wedi Tools tub sealing tape Stable, rigid lengthwise and elastic crosswise joint sealing membrane
Technical properties wedi Tools tub sealing tapeStable, rigid lengthwise and elastic crosswise joint sealing membrane
|Type||TPE coated polypropylene fleece with butyl strip|
|Total width||120 mm|
|Coating width||Butyl strip 15 mm width|
|Total thickness||1,32 mm|
|Maximum longitudinal tensile strength||approx. 104 N / 15 mm|
|Maximum lateral tensile strength||approx. 23 N / 15 mm|
|Elongation at break, longitudinal||ca. 70%|
|Elongation at break, lateral||approx. 335%|
|Resistance to water pressure (1.5 bar)||> 1,5 bar|
|Resistant to chemicals||acc. to ZDB data sheet|
|Water impermeability||acc. to ZDB data sheet|
|UV resistance||> 500 h|
|Temperature resistance||-30°C / +90°C|
Area of use wedi Tools tub sealing tapeFor secure sealing of tubs and shower trays made of steel, enamel, acrylic or similar.
When sealing, the wedi Tools tub sealing membrane must be bonded onto the tub or shower tray with the butyl strip, and pressed on evenly. The surface seal is attached to the wall using wedi 610 or wedi 520. In the case of installation with wedi 610, the tub sealing membrane should be pressed evenly into the adhesive bed with a roller. In the case of bonding with wedi 520, the front and rear side of the sealing membrane should be embedded in filler.
Store in a cool, dry place and protect from sunlight.