Designing and constructing with the wedi Building Panel
The wedi Building Panel in 2” thickness can also be the used for creation of steps and platforms in residential , domestic applications. After cutting and installation the wedi Building Panel can be finished with any tile based surface covering (min tile dimensions on pedestals 4 x 4 inches or 10x10 cm).
Step 1Cut wedi Building Panel to size for creation of the platform supports. Set supports with a max. spacing of 18 inches ( center to center).
Step 2Apply wedi Joint sealant to the surface edges.
Step 3Affix Building Panel as cover onto the platform supports using wedi Joint sealant. Panel seams must always be supported by a support beneath ( entiue length of seam).
Step 4Apply self-adhesive wedi Tools reinforcement tape to all joints or wedi joint sealant in wet areas.