wedi Tool hulrumsdyvelsæt

wedi Tool hulrumsdyvelsæt

Produktinformation

Hulrumsdyvelsæt til nem og hurtig montering af badtilbehør som spejl, sæbedispenser eller håndklædeholdere.

Tekniske detaljer

Tekniske egenskaber hulrumsdyvelsæt

The specified values refer exclusively to tiled building boards where the board’s thickness is a minimum of 20 mm. Installation on building boards with other finishes (plaster, etc.) is not permitted. For loads more than 25 kg (e.g. bath handrail) anchoring in a stable, load-bearing surface is required. This must be planned on site where necessary.

Allowable load

0,12 KN

Produktstørrelser

Bestillingsnummer	Betegnelse	Længde
206553004	wedi Tools, dyvelsæt til hulrum, 10 dyvler og 10 skruer	Dyvler: Ø 4,5 × 60 mm Skruer: Ø 6,0 × 35 mm

Anvendelse

Tekniske egenskaber wedi Tool hulrumsdyvelsæt

To fix light objects such as soap dishes, toilet paper holders, towel holders etc. to tiled wedi building boards/foam elements.

Drill a 6-mm hole. Remove drilling dust. Hammer in dowel.

The specified values refer exclusively to tiled building boards where the board’s thickness is a minimum of 20 mm. Installation on building boards with other finishes (plaster, etc.) is not permitted. For loads more than 25 kg (e.g. bath handrail) anchoring in a stable, load-bearing surface is required. This must be planned on site where necessary.

Tilbehør

Matchende produkter

Byggeplade

wedi byggeplade XL og XXL