Ring til os, og vi står klar til at hjælpe dig:
+45 (0) 473 823 29 firstname.lastname@example.org
Wir sind für Sie erreichbar:
+49 (0)2572 156 0 email@example.com
Lay out wedi Subliner Dry and cut by using a cutter or scissors.
Apply thin-bed mortar to the prepared subfloor using a 4 or 6 mm toothed trowel.
Insert wedi Subliner Dry with the printed side facing upwards and press on with a rubber roller or wooden board.
The widths must overlap at the joints by approx. 5-10 cm. Apply cement-based slurry-type sealing compounds to the overlapping area.
Insert the second width and press on the overlapping area using a trowel or rubber roller.
Seal off corner joints and floor connections with wedi sealing tape and cement-based slurry-type sealing compounds. Apply the sealing tape in the middle of the joint.
The floor covering can be laid after the thin-bed mortar has hardened.