Reinforcement boards integrated into the wedi building board
Reinforcement boards can be integrated into the wedi building boards to further stabilise the wall and floor surfaces. Only a few steps are required to grant additional stability for heavy objects such as shelves, towel holders or radiators.
Step 1Mark the exact position for the reinforcement board.
Step 2Cut the marked area by using a router. The depth depends on the thickness of the reinforcement board. The adhesive adds further 2 mm.
Step 3Bond reinforcement board flush-mount by using wedi 610 adhesive sealant.
Step 4Then, reinforce with self-adhesive wedi Tools reinforcement tape.
Step 5Finally, mark the reinforcement board e.g. with a centrally positioned screw.