Area of application

Free-standing wall systems

Wall constructions with wedi Moltoromo

With the modular wedi Moltoromo system, versatile wall configurations can be created effectively for different bathroom and wellness applications. Round shapes, angled solutions or curved lines, for example, can be installed quickly and easily.

Step 1 Pre-drill the holes for the mechanical fixings (diameter: 6 mm).

Step 2 For connection to the wall, vertically attach the wall and door fixingset by using mechanical fixings.

Step 3 If a door is to be fastened, wedi 610 adhesive sealant is applied onto the wall and door fixing set ...

Step 4 ... and then the wall and door fixing set is bonded and reinforced with wedi Tools reinforcement tape.

Step 5 An installation block is inserted on the floor to stabilise the Moltoromo wall elements. The installation block is positioned in the specified groove in the wall element.

Step 6 Before installing the tongue, an evenly applied layer of wedi 610 adhesive sealant is applied in the groove.

Step 7 Connection of two Moltoromo wall elements makes it necessary to insert the tongue into the groove before the glue has cured. In such case, the bottom of the tongue rests on the installation block.

Step 8 To mount the following elements on the already installed tongue, their grooves should also be coated with wedi 610 adhesive sealant first.

Step 9 Bond adjacent element to the wall element.

Step 10 Check vertical position and alignment of the wall elements by using a spirit level.

Step 11 Use slope wedges to compensate floor irregularities or slopes e.g. with Fundo floor elements. Slope wedges can be easily cut to the required size by using a knife.