WC dry wall installation (mechanical fixing method and adhesive bonded)
Building boards prefabricated elements wedi I-Board
wedi I-Board (1200 x 1245 x 20 mm) is a prefabricated fitting element for cladding of wall-mounted WCs. With a width of 1,200 mm, it can easily be adapted to virtually all specific needs. Despite its light weight, it is extremely strong and stable (up to 400 kg from a tile size of 10 x 10 cm). The installation cladding board can be tiled directly after fitting without further pre-treatment.
Step 1First cut the wedi I-Board to the required size with a utility knife.
Step 2Using a jigsaw, cut out a suitable opening for the flush actuator.
Step 3aThe prepared and cut I-board is mechanically attached to the dry wall installation using the supplied rapid fit screws in conjunction with the insulating board discs.
Step 3bAttach the wedi I-Board on the framework using wedi 610 adhesive sealant.
Step 4Now attach the previously cut strips of wedi I-Board to the top and sides with wedi 610 adhesive sealant.
Step 5Apply self-adhesive wedi Tools reinforcement tape to the joints and connection areas.
Step 6The wedi I-Board can be tiled directly after reinforcement without further pre-treatment.
Step 7 The joints between the wall covering and the flooring and the corner joints of the wall covering should be formed as expansion joints..